The Imaging Source Gstreamer Plugins

The following plugins are offered by The Imaging Source.

tcammainsrc

Source element that retrieves images from a device. The tcammainsrc existed as tcamsrc prior to tiscamera 0.13.0. It is used for v4l2, aravis and libusb devices.

Always use tcamsrc. tcammainsrc is considered an internal element.

tcammainsrc properties

fieldname

type

description

set available

get available

serial

string

Serial number of the device that shall be used

GST_STATE_NULL

always

type

string

Backend the camera shall use. Available options: v4l2, aravis, libusb, unknown

GST_STATE_NULL

always

camera-buffers

int

Number of internal buffers the backend can use.

< GST_STATE_PAUSED

always

num-buffers

int

Only send the specified number of images. With ‘num-buffers=200’ tcamsrc will automatically send an EOS and stop the device after 200 buffers have been sent to the pipeline.

< GST_STATE_PAUSED

always

drop-incomplete-buffer

bool

When incomplete buffers should be delivered this has to be set to false.

always

always

tcam-properties

GstStructure

Property that can be used to set/get the current TcamPropertyProvider properties. This can be used like: gst-launch-1.0 tcammainsrc tcam-properties=tcam,ExposureAuto=Off,ExposureTime=33333 ! …

always

always

TcamMainsSrc Caps Auto Selection

tcammainsrc will prefer certain GStreamer Caps over others when no explicit caps are given.

format:
prefer bayer 8-bit over everything else
if bayer 8-bit does not exist order according to the following list:
- color formats like BGR
- color formats like YUV
- formats like MJPEG
- GRAY16
- GRAY8
- pwl bayer
- bayer12/16
- polarized bayer
- polarized mono
width:
Will default to the highest value for the available range for the selected format.
If no format has been selected, one will be selected before a width is selected.
height:
Will default to the highest value for the available range for the selected format.
If no format has been selected, one will be selected before a height is selected.
framerate:
Will default to the highest framerate for the selected resolution.
If no resolution has been given it will be selected before a framerate is selected.
binning:

Will default to ‘1x1’ and omitted.

skipping:

Will default to ‘1x1’ and omitted.

MetaData

Each image buffer the tcamsrc send has associated meta data that contains multiple information concerning the buffer.

The meta object contains a GstStructure which contains all information. This is to ensure extensibility without interfering with user applications.

The following fields are available:

GstTcamMeta fields

fieldname

type

description

frame_count

uint64

number of frames delivered. Starts at 0 with every stream start.

frames_dropped

uint64

number of frames dropped by backend

capture_time_ns

uint64

Timestamp in Nanoseconds when the backend received the image

camera_time_ns

uint64

Timestamp when the device itself captured the image. Only useful for GigE.

is_damaged

bool

Flag noting if the buffer is damaged in any way. Only useful when drop-incomplete-buffer=false.

For timestamp point of reference values look Timestamps. Please be aware that not all GStreamer elements correctly pass GstMeta information through. Elements like bayer2rgb to not copy the meta information. This may affect your usage of elements like tcambin as they can use such elements internally.

Messages

The tcammainsrc element can send multiple possible messages to the GstBus. It is generally recommended to listen for error messages as these will be considered lethal to the video stream and cause a stream stop.

Device lost

An error message containing the string “Device lost” will always be sent when the device does not respond or is not reachable.

The received message will be in the format “Device lost (<SERIAL>)”. For an example of message handling, see the example 09-device-lost.

Note

The following requires GStreamer >= 1.10

To simplify error handling the tcamsrc sends an additional “Device lost” message with a GstStructure attached. This structure contains the string field “serial”. This implies tiscamera was compiled with gstreamer >= 1.10.

/* This code only works when using gstreamer version 1.10 or higher */
GstStructure* struc = gst_message_parse_error_details(message);
const char* lost_serial = gst_structure_get_string(struc, "serial");

tcampimipisrc

Closed source GStreamer Source for FPD/MiPi Cameras on RaspberryPi.

You can find a Debian package in our download section.

Further information can be found in the online documentation.

tcamtegrasrc

Closed source GStreamer Source for FPD/MiPi Cameras on NVidia Jetson systems.

You can find a Debian package in our download section.

Further information can be found in the online documentation.

tcamsrc

The tcamsrc is a source bin that allows access to all source elements supported by tiscamera. It is a convenience wrapper and offers no additional properties.

As of tiscamera 0.13.0 the supported source elements include tcammainsrc and tcampimipisrc.
tiscamera 0.14.0 added support for tcamtegrasrc.
TcamSrc properties

fieldname

type

description

set available

get available

serial

string

Serial number of the device that shall be used

< GST_STATE_READY

always

type

string

Backend the camera shall use. Available options: v4l2, aravis, libusb, pimipi, unknown

< GST_STATE_READY

always

tcam-device

GstDevice

Assigns a GstDevice to open when transitioning from GST_STATE_NULL to GST_STATE_READY.

< GST_STATE_READY

never

tcam-properties

GstStructure

Property that can be used to set/get the current TcamPropertyProvider properties. This can be used like: gst-launch-1.0 tcambin tcam-properties=tcam,ExposureAuto=Off,ExposureTime=33333 ! …

always

always

tcam-properties-json

string

Property that can be used to set/get the current TcamPropertyProvider properties. This works the same way tcam-properties works, but uses a json string to provide the property names and values.

always

always

camera-buffers

int

Number of internal buffers the backend can use. Forwarded to the actual device opened in GST_STATE_READY.

always

>= GST_STATE_READY

num-buffers

int

Only send the specified number of images. With ‘num-buffers=200’ tcamsrc will automatically send an EOS and stop the device after 200 buffers have been sent to the pipeline. Forwarded to the actual device opened in GST_STATE_READY.

always

>= GST_STATE_READY

drop-incomplete-buffer

bool

When incomplete buffers should be delivered this has to be set to false. Forwarded to the actual device opened in GST_STATE_READY.

always

>= GST_STATE_READY

do-timestamp

bool

Sets the do-timestamp property. Forwarded to the actual device opened in GST_STATE_READY.

always

>= GST_STATE_READY

TcamSrc Caps Auto Selection

The caps auto selection is dependent on the internally used source element.

If your device uses the tcammainsrc (v4l2, aravis, libusb), see here.

tcamdutils

Closed source optional transformation and interpretation filter. Allows the transformation of bayer 12-bit and 16-bit formats to BGRx 64-Bit. Implements features like HDR. For more information read the documentation

Note

When using tiscamera-dutils with tcambin a version check is undertaken. tiscamera and tiscamera-dutils are version locked, meaning their major.minor version have to match. If a mismatch is detected, tcambin will disable the usage of the tcamdutils element and notify you with a GStreamer warning log message and a GstBus message. This can be overwritten by manually setting the tcambin property conversion-element to tcamdutils.

tcamdutils-cuda

Closed source optional transformation and interpretation filter. Allows the transformation of bayer 12-bit and 16-bit formats to BGRx 64-Bit. Optimized for NVidia Jetson platforms. Part of the package tcamdutils-cuda.

Note

When using tcamdutils-cuda with tcambin a version check is undertaken. tiscamera and tcamdutils-cuda are version locked, meaning their major.minor version have to match. If a mismatch is detected, tcambin will disable the usage of the tcamdutils element and notify you with a GStreamer warning log message and a GstBus message. This can be overwritten by manually setting the tcambin property conversion-element to tcamdutils-cuda.

tcambin

Wrapper around all the previous elements, allowing for an easy all-in-one handling. The tcambin will prefer bayer 8-bit over bayer 12/16-bit. Currently tcamdutils are required for a correct conversion of these formats. Since tcamdutils are an optional module its existence can not be expected. To ensure identical behavior whether or not tcamdutils are installed, bayer 8-bit will be preferred unless the user explicitly specifies bayer 12/16-bit for the source through the property ‘device-caps’. The selected caps for the internal tcamscr will be propagated as a gstbus message with the prefix “Working with src caps: “. The offered caps are the sum of unfiltered camera caps and caps that will be available through conversion elements like bayer2rgb.

The format that can always be expected to work is BGRx. All other formats depend on the used device.

Note

When using tcamdutils or tcamdutils-cuda with tcambin a version check is undertaken. tiscamera and tcamdutils/tcamdutils-cuda are version locked, meaning their major.minor version have to match. If a mismatch is detected, tcambin will disable the usage of the tcamdutils/tcamdutils-cuda element and notify you with a GStreamer warning log message and a GstBus message. This can be overwritten by manually setting conversion-element to the concerning element name.

TcamBin properties

fieldname

type

description

set available

get available

serial

string

Serial number of the device that shall be used

GST_STATE_NULL

always

type

string

Backend the camera shall use. Available options: v4l2, aravis, libusb, pimipi, unknown

GST_STATE_NULL

always

tcam-device

GstDevice

Assigns a GstDevice to open when transitioning from GST_STATE_NULL to GST_STATE_READY.

GST_STATE_NULL

never

available-caps

string

String description of the GstCaps that can be used in device-caps. Will be equal to or a subsection of the GstCaps offered by tcamsrc.

never

>= GST_STATE_READY

device-caps

string

String that overwrites the auto-detection of the gstreamer caps that will be set for the internal tcamsrc

< GST_STATE_PAUSED

always

tcam-properties

GstStructure

Property that can be used to set/get the current TcamPropertyProvider properties. This can be used like: gst-launch-1.0 tcambin tcam-properties=tcam,ExposureAuto=Off,ExposureTime=33333 ! …

always

always

tcam-properties-json

string

Property that can be used to set/get the current TcamPropertyProvider properties. This works the same way tcam-properties works, but uses a json string to provide the property names and values.

always

always

conversion-element

enum

Select the transformation element to use. Assuming all elements are available the selection is as follows:

tcamdutils-cuda > tcamdutils > tcamconvert

Both tcamdutils and tcamdutils-cuda are available as separate packages in our download section. This property has to be set while in state GST_STATE_NULL.

Possible values: auto, tcamconvert, tcamdutils, tcamdutils-cuda Default: auto

GST_STATE_NULL

always

Internal pipelines will always be created when the element state is set to READY.

tcamsrc -> capsfilter -> tcamconvert

tcamsrc -> capsfilter -> tcamdutils

tcamsrc -> capsfilter -> tcamdutils-cuda

tcamsrc -> capsfilter -> jpegdec

tcamsrc -> capsfilter

GObject properties

GObject property tcam-device

This write-only property allows to open a specific device by passing a GstDevice.

tcam-device is only writeable in GST_STATE_NULL.

In the transition from GST_STATE_NULL to GST_STATE_READY, if this property was set, the tcamsrc calls gst_device_create_element with the assigned GstDevice.

If this property is not set, the default opening procedure uses serial and type to find a suitable device via GstDeviceMonitor.

E.g:

GstElement* src = ...;
GstDevice* dev = fetch_first_device_from_monitor();

g_object_set( G_OBJECT( src ), "tcam-device", dev );

GObject property tcam-properties

In state == GST_STATE_NULL:

  • Set on tcam-properties copies the passed in structure. This structure gets applied to the device when transitioning to GST_STATE_READY.

  • Get on tcam-properties returns either the previously passed in structure or if nothing was set, an empty structure.

Note

The property values set in GST_STATE_NULL are only used by the next state transition to GST_STATE_READY and are discarded after that.

In state >= GST_STATE_READY:

  • Set on tcam-properties applies the passed in GstStructure to the currently open device.

  • Get on tcam-properties returns the property values of the currently open device.

One usage is using this to specify the startup properties of the device in a command line.

E.g.:

gst-launch-1.0 tcammainsrc tcam-properties=tcam,ExposureAuto=Off,ExposureTime=33333 ! ...

Property names and types are the ones of the TcamPropertyBase objects exposed by the TcamPropertyProvider interface.

If a locked property is encountered it will by tried again after all other properties have been set.

GObject property tcam-properties-json

In state ==  GST_STATE_NULL:

  • Set on tcam-properties-json copies the passed in string. This data gets applied to the device when transitioning to GST_STATE_READY.

  • Get on tcam-properties-json returns either the previously passed in string or if nothing was set, an empty string.

Note

The property values set in GST_STATE_NULL are only used by the next state transition to GST_STATE_READY and are discarded after that.

In state >= GST_STATE_READY:

  • Set on tcam-properties applies the passed in json data to the currently open device.

  • Get on tcam-properties returns the property values of the currently open device.

This can be used to get a json formatted snap shot of the current property values or to set saved property values in the device.

Property names and types are the ones of the TcamPropertyBase objects exposed by the TcamPropertyProvider interface.

If a locked property is encountered it will by tried again after all other properties have been set.

This example would dump the device property settings as a json string to the command line:

tcam-ctrl --save <serial>